Carbon steel butt-welding pipe fitting
Elbow:
Carbon steel elbows are used to connect and redirect pipe-line. Because of good comprehensive performance, which is widely used to Chemical, construction, water, petroleum, electric power, aerospace, shipbuilding and other basic engineering
Including Long radius elbow, Short radius elbow,90 degree elbow, 45 degree elbow,180 degree elbow, Reducing elbow.
Tee:
A tee is a kind of pipe fitting and pipe connector with three openings, that is, one inlet and two outlets; or two inlets and one outlet, and used at the convergence of three identical or different pipelines. The main function of the tee is to change the direction of the fluid.
Including equal tee(with the same diameter at three ends)/reducing tee(the branch pipe is different in diameter from the other two)
Cap:
End caps are usually used for protecting the end of pipe and other fittings, so the shape are designed according to the shape of pipe line.
Reducer:
A carbon steel reducer is a kind of carbon steel pipe fittings. The material used is carbon steel, which is used for the connection between two pipes with different diameters. According to the different shapes, it is divided into two types: Concentric reducer and eccentric reducer. Concentricity is well understood that the center points of the circles at both ends of the pipe are called concentric reducers on the same straight line, and vice versa is the eccentric reducer.
Our Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc. From incoming inspection to finished product, quality is checked and monitored in the whole process.
