KCB/2CY Series Gear Pump

KCB/2CY Series Gear Pump

Short Description:

This pump is suitable for liquids with lubricant property. The temperature is not higher than 70 ℃. If customers ask for pumps for 300 ℃ medium, please inform us in advance. In order to meet the requirements, the pump will be equipped with high temperature resistant materials. Medium viscosity is from 5×10-5 to 1.5×10-3m2/s.
The pump is not suitable for delivering corrosive liquids, liquids containing hard particles or fibers, highly volatile or low boiling point liquids, such as gasoline, benzene, etc.


Product Detail

Product Tags

Performance Range

Flow Rate Range: 1.1- 8m³/h
Suction Head: 5-3m
Operation Temperature: -10℃ - 150℃
Seal: Mechanical seal

Advantages

1. Driving Gear Passive Gear
The active/passive gear after high temperature quenching, ion carburizing lime chloride. Gear has a stronger hardness, wear resistance, high temperature resistance, etc. Can extend the service life of the gear.

2. High Temperature Bearing
High temperature bearings can bear larger load torque, under high temperature, good stability, high bearing capacity, withstand high temperatures. Wear small, long life. Gear KCB18.3-KCB83.3 is the sliding bearing, KCB200 above is the rolling bearing.

3. Mechanical Seal
Carbide mechanical seal, with good heat resistance and impact resistance, friction coefficient is small, self lubricating performance, reliable performance, no leakage, high temperature resistance, wear resistance, corrosion resistance.

4. Integral Coupling
High temperature gear pump uses the integral coupling, safe and reliable, the concentricity is good, the service life is long, under the heavy load operation bears the torque ability to be strong.

5.100% Copper Motor
Gear pump matching 100% copper motor, stable operation, low calorific value, output power standards, long service life.

6. Certificate of Inspection
Out of the factory every gear pump has been strictly tested, and equipped with a certificate, manual, test data report, the ship with the Chinese classification society CCS certificate.

Technical Parameters

Model Capacity Speed ( r/min ) Exhaust Pressure ( MPa ) ( NPSH )
r/m
Efficiency (η/ % ) Motor
m³/h L/min Power
( kw )
Model
KCB-18.3 1.1 18.3 1400 1.45 5 59 1.5 Y90L-4
2CY-1.1/1.45
KCB-33.3 2 33.3 1420 1.45 5 59 2.2 Y100L1-4
2CY-2/1.45
KCB-55 3.3 55 1400 0.33 7 41 1.5 Y90L-4
2CY-33.3/0.33
Model Capacity Speed ( r/min ) Exhaust Pressure ( MPa ) ( NPSH )
r/m
Efficiency (η/ % ) Motor
m³/h L/min Power ( kw ) Model
KCB-135 8 135 940 0.33 5 46 2.2 Y112M-6
2CY-8/0.33
KCB-200 12 200 1440 0.33 5 46 2.2 Y112M-4
2CY-12/0.33
KCB-300 18 300 960 0.36 5 42 5.5 Y132M2-6
2CY-18/0.36
KCB-483.3 29 483.3 1440 0.36 5.5 42 11 Y160M-4
2CY-29/0.36
KCB-633 38 633 970 0.28 6 43 11 Y160L-6
2CY-38/0.38
KCB-960 58 960 1470 0.28 6.5 43 37 Y180L-4
2CY-58/0.28 45
KCB-1200 72 1200 740 0.6 7 43 37 Y280S-8
KCB-1600 96 1600 980 45 Y280S-6
KCB-1800 108 1800 740 0.6 7.5 43 55 Y315S-8
KCB-2500 150 2500 985 75 Y315S-6
KCB-2850 171 2850 740 0.6 8 44 90 Y315L1-8
KCB-3800 228 3800 989 110 Y315L1-6
KCB-4100 246 4100 743 0.6 8 44 132 Y355M1-8
KCB-5400 324 5400 989 160 Y355M1-6
KCB-5600 336 5600 744 0.6 8 44 160 Y355M2-8
KCB-7000 420 7000 744 185 Y355L1-8
KCB-7600 456 7600 989 200 Y355M3-6
KCB-9600 576 9600 989 0.6 8 44 250 Y355L2-6
Remark Parameter table above is only a part of whole. For more, please contact us directly.
2 CY Series Gear Pumps
Model Capacity Speed ( r/min ) Exhaust Pressure ( MPa ) ( NPSH )
r/m
Efficiency (η/ % ) Motor
m³/h L/min Power ( kw ) Model
2CY-1.08/2.5 1.08 18 1420 2.5 5.5 58 2.2 Y100L1-4
2CY-2.1/2.5 2.1 35 1420 2.5 5.5 58 3 Y100L2-4
2CY-3/2.5 3 50 1440 2.5 5.5 59 4 Y112M-4
2CY-4.2/2.5 4.2 70 1440 2.5 5.5 62 5.5 Y132S-4
2CY-7.5/2.5 7.5 125 1440 2.5 5.5 63 7.5 Y132M-4
2CY-12/2.5 12 200 1460 2.5 5.5 61 15 Y160L-4
2CY-21/2.5 21 350 1440 2.5 5.5 60 30 Y200L-4
Remark Parameter table above is only a part of whole. For more, please contact us directly.

  • Previous:
  • Next: