China Personlized Products Socket Welded Strainer - Water flow indicator UL/FM Approved – BESTOP factory and suppliers

Personlized Products Socket Welded Strainer - Water flow indicator UL/FM Approved – BESTOP

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We try for excellence, service the customers, hopes to be the most effective cooperation workforce and dominator company for staff, suppliers and shoppers, realizes price share and ongoing marketing for Cs Ball Check Valve, Stainless Steel 304 Valves, Pn16 Ball Check Valve, When you are interested in any of our solutions or want to examine a tailor made get, you should really feel absolutely free to speak to us.

Personlized Products Socket Welded Strainer - Water flow indicator UL/FM Approved – BESTOP Detail:

Overview:
The vane type waterflow switch use in wet pipe systems only. Waterflow in the pipe deflects a vane, which produces a switched output usually after a specified delay.
Main components:
Water flow indicator is mainly composed of the saddle, blade rack, bottom plate, outer cover, air delay device, micro-switch, junction box, etc.

Main Dimensions of Water Flow Indicator
Specification	L	H
DN50	85	188
DN65	92	200
DN80	106	220
DN100	134	245
DN125	162	272
DN150	189.5	298
DN200	240	350

1	Body	ASTM A536 65 45-12
2	Blade rack	S.S.304+EPDM
3	Bottom plate	S.S.304
4	Outer cover	ASTM B85 A03600
5	Air delay device	Component
6	Blade	LLDPE
7	Micro-switch	Component
8	Sealing gasket	EPDM
9	Junction box	PC

size

Installation of water flow indicator:at the pre-set installation position, use a tapper to drill on the main pipeline and remove burrs according to the product specification;roll up the blade into a small size and put it into the pipeline, install the U-shaped bolt and fasten it up with two fastening nuts.

size

Wiring: The typical wiring diagram is shown

When drilling the hole, the center of the hole has to be on the center line of the pipeline;The hole size is shown.

Specification	Hole size
DN50, DN65	32+2mm
DN80-DN200	51 +2mm

size

Product detail pictures:

Related Product Guide:

The organization upholds the philosophy of Be No.1 in good quality, be rooted on credit history and trustworthiness for growth, will keep on to provide previous and new customers from home and overseas whole-heatedly for Personlized Products Socket Welded Strainer - Water flow indicator UL/FM Approved – BESTOP , The product will supply to all over the world, such as: Bolivia, Mauritius, US, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.

Air Relief Valve Water Distribution